Quickest ways to Clean Velcro

Intoduction

In the 1940s, a hike through the woods led to the creation of a product that is still used all the time today. George de Mestral saw how well the hooks of the cocklebur stuck to his clothes. This gave him the idea for VELCRO, a way to fasten things with hooks and loops.

Also read: Quickest ways to clean a waterpik

The idea caught on, and soon other companies were making hook-and-loop fasteners. These are made of two different materials: one side has hooks, which are rough and scratchy, and the other side has loops, which are soft and fuzzy. When the two sides are closed together, they make a strong bond that can be broken later. Hook-and-loop fasteners can be bought with an adhesive back so they can be used on hard surfaces, but most of the time they are sewn on to clothing and accessories.

Unfortunately, lint, dirt, and other small things can get caught in the fasteners and make them lose their grip and look messy. Luckily, you only need a few things to clean and fix the fasteners.

How Often Should You Clean Hoops and Loops?

There is no rule about how often you should clean the fasteners, but doing it often will keep problems from happening. Most hook and loop fasteners are made of nylon, which attracts lint, hair, and dust like a magnet. When they get dirty or don’t stay together well anymore, it’s time to give them some care.Quickest ways to Clean Velcro

Carefully cleaning with the best green laundry detergents

What You Need to Know

Equipment / Tools
Tweezers
Comb with small teeth
Toothbrush holder for tape
Microfiber cloths and a small bowl
Materials
Packing tape
Lint roller Stain remover that works with enzymes
Laundry detergent
Bleach made with oxygen
Instructions
Things you need and ways to clean velcro
Meg MacDonald’s “The Spruce”

How to Clean Lint Off VELCRO Closures

Use a Toothbrush to Get Rid of Lint
Lint that is stuck in the fibers can be removed with a toothbrush with stiff bristles or a small detail scrub brush like the one from Cloth+Bristle. Use short, quick strokes with the toothbrush on a flat surface to get the lint and dirt out. Work from one end of the fastener to the other, pulling loose lint away with your fingers. Make sure both the hook and loop sides of the fastener are clean.

ALSO READ: Hewlett-Packard (HP) Internships for students 2023

With a stiff-bristled toothbrush, a fiber-caught Velcro fastener is rubbed.

Get a lint roller.

Most of the time, a good, sticky lint roller will pull out the junk. Set the hook and loop fastener on a flat surface and work from one end to the next. Roll over both sides several times, switching the surface of the lint roller as needed.

Also read: Cambridge University Acceptance rate

A sticky lint roller is rolled over a velcro fastener to remove fibers that have become stuck.

Get some tape that sticks.

If you don’t have a lint roller, you can also clean the fastener by wrapping a piece of sticky packing or duct tape around your hand. As lint is moved, keep moving to a clean part of the tape.

Sticky tape wrapped around finger pulling fibers from velcro fastener
Use the cutting edge of the tape dispenser
While you have the tape out, you can also use the sawtooth cutting edge to get rid of lint. Turn the dispenser so you can move the debris out with short, quick strokes along the edge. Use your fingers or a piece of sticky tape to pick up the lint that has come loose.

The cutting edge of the red tape dispenser scrapes the fibers out of the velcro fastener.
Tweeze Away Lint
Lint can be taken off with a pair of tweezers with a flat or angled tip and a little bit of time. Tweeze both sides of the fastener as you move from one end to the other.

Tweezers are used to pull stuck fibers out of a velcro fastener.
Comb Out Lint
Lint can be removed with a fine-toothed comb just like with a toothbrush. When you work on a flat surface, it’s easier to do the job.

ALSO READ: Chevening Scholarship 2023-2024 | Application Process (Fully Funded)

A fine-toothed pink comb is used to get rid of tangled fibers.
Clean the hook side with another fastener.
If the hook side is full of lint, you can rub it with another hooked piece to get the lint out. If you are in a hurry, this works well. When you have more time, you can clean each piece more thoroughly.

Hooked fastener used to get fibers out of a Velcro fastener

How to Wash VELCRO and Get Stains Out

Get rid of the lint
Use one of the ways to clean the hook and loop fastener of lint and other things.

Tweezers are used to pull stuck fibers out of velcro fasteners on washable clothes.
Take care of the dirty fastener
Before washing, treat heavily stained fasteners on clothes that can be washed with a bit of laundry detergent or an enzyme-based stain remover. Use your fingers or a soft-bristled brush to work the stain remover into the stain. Let the stain remover work on the stain for at least 10 minutes to break it up before you wash the item.

The enzyme-based stain remover is rubbed into the velcro of a washable garment with a soft-bristled brush.
Whiten Dingy Fasteners
If white fasteners are dirty, mix oxygen-based bleach and warm water according to the instructions on the package. Put the whole thing in water and let it soak for at least 8 hours. The oxygen bleach won’t hurt the fabric or the fasteners made of nylon-fiber.

Velcro from a garment that can be washed was put in a small bowl of water and oxygen-based bleach.
Just like always
Close the buttons and follow the instructions on the care label to wash the item.

Before washing, Velcro fasteners were closed on clothes that could be washed.
How to Clean and Get Stains Out of VELCRO on Items That Can’t Be Washed
Take out any junk from the fastener
Use one of the suggested ways to clean the fastener on both sides.

ALSO READ: Dalhousie University Acceptance Rate And Admission

A fine-toothed pink comb is used to remove fibers from the velcro on a green and black bag that can’t be washed.
Make a solution to clean.
Mix a cup of very warm water and a few drops of laundry detergent in a small bowl.

A small bowl of water and laundry detergent in front of a bag that can’t be washed.
Use a Toothbrush to Scrub

Dip a toothbrush with stiff bristles into the cleaning solution and scrub the hook and loop fastener carefully on both sides. Try not to put too much water on the area, and keep a microfiber cloth nearby to catch any drips.

A stiff-bristled brush rubs cleaning solution into the Velcro on a bag that can’t be washed.
Rinse Using a Wet Cloth
Dip a lint-free microfiber cloth into clean water and wring it out until it is just damp. Wipe the hooks and eyes down with the cloth to clean them.

Bag with Velcro that can’t be washed washed with a damp microfiber cloth
Air-Dry
Let the area dry naturally by leaving the fastener open.

Bag that can’t be washed hanging to dry on a clothesline with pins.

How to keep VELCRO clean so it lasts longer

Close the fasteners all the way when you’re not using them so they don’t get dirty.
Close the fasteners before putting the clothes in the hamper or washer to keep them from getting caught on things or getting lint on them.
A bit of anti-static spray on clean fasteners will help keep lint away.
At least once a month, clean the fastener of lint and other unwanted things.Quickest ways to Clean Velcro

Is washing Velcro harmful?

Velcro. The age-old question, “Can you wash velcro?” has finally been answered: yes, you can! Whether it’s baby bibs, sports equipment, or shoes with velcro straps, you can be confident that it’s safe as long as you wash it properly.Quickest ways to Clean Velcro